IP Cam Viewer     My Amazon IP Cameras    

IP Cam Viewer

Information about my free Android Applications available in the Android Market for cell phones and embedded devices.

Re: IP Cam Viewer

Postby vphagura » Fri Jul 04, 2014 6:32 am

I have tried all these nothing worked. I tried:
- chged camera IPs outside my DHCP range
- upgraded software on my cameras(FI8918W)
- chged my router channel to 7
- chged encryption to TKIP

nothing works for me.

The issue I have is that my cameras work fine when inside my LAN but as soon as I shut down the wireless on my phone it connects thru the external IP to my router I can see all my cameras fine for 20 secs then they drop one by one till all are gone. Then I have to wait many minutes to connect again and again the same thing.

But I have noticed that this does not happen on one particular Android app 'Foscam Viewer' but happens on IP Cam viewer and tinycam Monitor.

Any thoughts or suggestion would be appreciated.

Thx in advance.

Vijay
vphagura
 
Posts: 2
Joined: Thu Jul 03, 2014 7:25 pm

Re: IP Cam Viewer

Postby admin » Tue Sep 09, 2014 5:17 pm

turn off DDOS attack check in router.
User avatar
admin
Site Admin
 
Posts: 195
Joined: Sun Feb 08, 2009 11:19 am

Re: IP Cam Viewer

Postby jvernon1235 » Wed Sep 17, 2014 6:28 am

I'm having trouble getting PTZ control of my Neewer V100 cameras and I was wondering if anyone else has found an already existing driver that works with them. I can get video to stream just fine with quite a few of the built in drivers, but I have no motion control and I can not send and receive audio. Any help would be greatly appreciated.

Thanks.
jvernon1235
 
Posts: 1
Joined: Tue Sep 16, 2014 7:25 am

Re: IP Cam Viewer

Postby N4Spd » Thu Sep 25, 2014 10:25 pm

http://hit-mob.com/ip-cam-viewer-androi ... port-list/

There's probably a compatible driver already in the app. Use Scan Camera function to find compatible drivers (click menu key in Manage Cameras, select Scan Camera).

If you only want Wifi access to camera, then first verify network accessibility by viewing your camera/dvr's login page using the phone/tablet browser.

If you want 2/3/4g access to camera, then verify network setup by viewing your camera/dvr using a PC IE browser from OUTSIDE your home wifi. Next, your phone/tablet browser should be able to load the login page but viewing may not be possible due to lack of active-x IE controls.
See this link for info: viewtopic.php?f=8&t=47

Once that works, then try my app. The "Scan Camera" function can help when you're not sure of the make/model. Try scanning the device's WEB/MEDIA/MOBILE/DATA ports (shown in device settings).

If Scan Camera return no results, then try to find a driver by DVR port or by login screen:
http://hit-mob.com/contact/default-ports-for-devices/
http://hit-mob.com/contact/login-screens-for-devices/

If you still have problems, AFTER scanning ALL device ports and reading all links, then give me temporary access to it and I'll put it into my work queue.

Just email me the web login URL and a temporary username/password.

Also, include the make/model and a product url link (if possible).

Thanks,
Rob

http://hit-mob.com/ip-cam-viewer-android/
http://hit-mob.com/ip-camera-viewer-ios/
N4Spd
 
Posts: 1397
Joined: Sun Feb 08, 2009 3:25 pm

Re: IP Cam Viewer

Postby keener » Thu Oct 30, 2014 9:58 am

Can someone tell me if this app has the ability to watch recorded video from my NVR? If I read it correctly, you can watch recorded video only if it was recorded on your smartphone. I need to remotely view recorded video on my NVR. Thanks.
keener
 
Posts: 1
Joined: Tue Oct 28, 2014 7:10 am

Re: IP Cam Viewer

Postby kokwhye » Thu Nov 06, 2014 2:21 am

Hi,

I have been using the IP Cam Viewer Pro (both Android and iOS version) to view the IP Cameras I have setup. Recently, I purchased a Sineoji branded IP Camera to replace a faulty IP Camera (EasyN). Model is 355V (http://www.sineoji.com/products/products-details/pt335v). I scrolled through the Device list and realized that this camera is not supported yet. Can I seek your assistance to support this camera so that I have an integrated app to view all my IP Cameras.

Thanks for the great work done so far!

KokWhye
kokwhye
 
Posts: 1
Joined: Thu Nov 06, 2014 2:01 am

Re: IP Cam Viewer

Postby admin » Wed Nov 19, 2014 3:22 pm

http://hit-mob.com/ip-cam-viewer-androi ... port-list/

There's probably a compatible driver already in the app. Use Scan Camera function to find compatible drivers (click menu key in Manage Cameras, select Scan Camera).

If you only want Wifi access to camera, then first verify network accessibility by viewing your camera/dvr's login page using the phone/tablet browser.

If you want 2/3/4g access to camera, then verify network setup by viewing your camera/dvr using a PC IE browser from OUTSIDE your home wifi. Next, your phone/tablet browser should be able to load the login page but viewing may not be possible due to lack of active-x IE controls.
See this link for info: viewtopic.php?f=8&t=47

Once that works, then try my app. The "Scan Camera" function can help when you're not sure of the make/model. Try scanning the device's WEB/MEDIA/MOBILE/DATA ports (shown in device settings).

If Scan Camera return no results, then try to find a driver by DVR port or by login screen:
http://hit-mob.com/contact/default-ports-for-devices/
http://hit-mob.com/contact/login-screens-for-devices/

If you still have problems, AFTER scanning ALL device ports and reading all links, then give me temporary access to it and I'll put it into my work queue. Email me the web login URL and a temporary username/password.

Also, include the make/model and a product url link (if possible).

Thanks,
Rob
User avatar
admin
Site Admin
 
Posts: 195
Joined: Sun Feb 08, 2009 11:19 am

Re: IP Cam Viewer

Postby techspy » Wed Dec 17, 2014 11:45 pm

The latest update reverted my purchased "basic" back to the unpaid basic with ads. I still have my registration code but there is NO WHERE to enter it in the app. Only the "Upgrade" button that wants me to pay again. This has happened before and Robert sent me a link to download the latest version that allows a code to be entered but that link no longer works. Anyone have a solution?
techspy
 
Posts: 3
Joined: Wed Sep 28, 2011 10:15 am

Re: IP Cam Viewer

Postby N4Spd » Fri Dec 26, 2014 1:53 pm

You can download the Lite version from me below:
http://hit-mob.com/install_lite.html

Run IP Cam Viewer Lite.
Enter your unlock code to unlock it.
(click Menu key, select Upgrade Now, read instructions at bottom for unlock link)

techspy wrote:The latest update reverted my purchased "basic" back to the unpaid basic with ads. I still have my registration code but there is NO WHERE to enter it in the app. Only the "Upgrade" button that wants me to pay again. This has happened before and Robert sent me a link to download the latest version that allows a code to be entered but that link no longer works. Anyone have a solution?
N4Spd
 
Posts: 1397
Joined: Sun Feb 08, 2009 3:25 pm

Re: IP Cam Viewer

Postby naddel81 » Thu Mar 05, 2015 5:33 am

Hi Robert Chou,

thank your for your great app. It is my favourite IP Cam App (and I had to use a few until I found yours).

The latest iOS update to version 2.5.3 changed the view on my iPhone 6 in the main menu. Unfortunately the previews are much smaller now and there is more unused space (white borders). It would be great to change the scale in the app settings. Currently you have included how many columns are shown (matrix). A scaling option would be awesome because in the previous versions I had a much better overview on my iPhone 6. Now I have to put my glasses on to see whats going on on my 5 cams or I have to use matrix = 1 and scroll down to see them all.

I hope you don't mind my small hint, because except for that the app is GREAT!!! Keep it up!

Best wishes from Germany!
naddel81
 
Posts: 1
Joined: Wed Mar 04, 2015 10:44 pm

PreviousNext

Return to Discussions

Who is online

Users browsing this forum: No registered users and 4 guests