Amcrest IP2M-841B Video

[mhf7]

I have an Amcrest IP2M-842B camera. Setup and connection to IP Cam Viewer For for iOS appears to work, the test reports successful and a picture appears. The video is also working the tiled overview page.

When I tap on the video feed for the camera I immediately get "Camera / Feed Not Available". I have tried the following without success:

1. Reset the camera to defaults
2. Set the Video feeds, main and sub streams, to Encode Mode H.264 and the Audio to G.711A 8k.

Hopefully There is an easy fix for this.

Thank you for your help.

Mike

[admin]

see Edit Camera

detail view uses RTSP port.

make sure RTSP port is correct and accessible from outside.

[mhf7]

I am on the internal network, port 80, and still cannot access the camera with IP Cam Viewer Pro. The Amcrest app works as expected.

The camera supports 3 video modes: H.264, H.264B, and H.264H, I have selected H.264. I have attached a screenshot of the video settings.

Any suggestions on getting this working would be appreciated.

Mike