Page 1 of 1

PTZ controls on Raspberry pi

PostPosted: Mon Jun 13, 2016 9:55 am
by StinkyPants
I have it working with http://elinux.org/RPi-Cam-Web-Interface and all the controls work when I connect to it via a web page.

However, In the pro version of this app it does not work. Is there something I am missing?

Re: PTZ controls on Raspberry pi

PostPosted: Fri Aug 19, 2016 4:32 am
by N4Spd
email me directly: robert [dot] chou [at] gmail[dot] com

Re: PTZ controls on Raspberry pi

PostPosted: Sun May 07, 2017 4:57 am
by thymjan
Is there a way to move the RPi Cam via the IP Cam Viewer?
I can't move it with the app.

I figured out you can move the camera with the following line:
Code: Select all
    http://<IP>/html/pipan.php?pan=100&tilt=80

where is
pan=[0...200], tilt[0...200]

One can switch on the light with:
Code: Select all
    http://<IP>/html/pipan.php?red=255&green=255&blue=255


and off:
Code: Select all
    http://<IP>/html/pipan.php?red=0&green=0&blue=0


Is there a way to implement this in IP Cam Viewer?

Re: PTZ controls on Raspberry pi

PostPosted: Sun May 07, 2017 5:13 am
by thymjan
Is there a way to move the RPi Cam via the IP Cam Viewer?
I can't move it with the app.

I figured out you can move the camera with the following line:
Code: Select all
    http://<IP>/html/pipan.php?pan=100&tilt=80

where is
pan=[0...200], tilt[0...200]

One can switch on the light with:
Code: Select all
    http://<IP>/html/pipan.php?red=255&green=255&blue=255


and off:
Code: Select all
    http://<IP>/html/pipan.php?red=0&green=0&blue=0


Is there a way to implement this in IP Cam Viewer?

Re: PTZ controls on Raspberry pi

PostPosted: Tue May 16, 2017 9:23 am
by thymjan
How can one use PTZ-controll with the RPi-Cam-Web interface?