Which streaming profile Axis M1054

[dxfoxd]

I have Axis M1031W and M1054 IP cameras installed. The cameras offer different streaming profiles. Lige some other camera's (like the Dlink DCS6111) the profiles cannot be selected. Which profile is used by the IP Cam viewer? The reason I ask this is I cannot get the audio listening function of the M1054 to work. Only AAC audio encodig seems to work for the saved clips on my network (G711 and G726 gives no sound), but I guess this encoding is not supported by the IP Cam viewer?
Anyone with the same camera did get it to work?

[admin]

either of these drivers will work:
Axis M Series IP Cam
Axis M Series RTSP

2nd one uses rtsp.
for both, put stream# in the Ch.# field.

For audio, select the g726 audio codec in camera's settings and password type to 'encrypted and unencrypted'.

[dxfoxd]

Changing the driver to Axis RTSP worked!

Changed nothing to the sound so it was working with AAC. A little stuttering ans skipping sound, but lowering the bit rate brought much improvement.

Only selecting the driver did not show the CH# field so I cannot select anything there!